One Hat Cyber Team

Edit File: MPLS-LC-FR-STD-MIB

MPLS-LC-FR-STD-MIB DEFINITIONS ::= BEGIN
IMPORTS
   MODULE-IDENTITY, OBJECT-TYPE
      FROM SNMPv2-SMI
   MODULE-COMPLIANCE, OBJECT-GROUP
      FROM SNMPv2-CONF
   RowStatus, StorageType
      FROM SNMPv2-TC
   mplsInterfaceIndex
      FROM MPLS-LSR-STD-MIB
   DLCI
      FROM FRAME-RELAY-DTE-MIB
   mplsStdMIB
      FROM MPLS-TC-STD-MIB
   ;
mplsLcFrStdMIB MODULE-IDENTITY

LAST-UPDATED "200601120000Z"  -- 12 January 2006
   ORGANIZATION "Multiprotocol Label Switching (MPLS) Working Group"
   CONTACT-INFO
       "        Thomas D. Nadeau
                Cisco Systems, Inc.
        Email:  tnadeau@cisco.com

Subrahmanya Hegde
        Email:  subrah@cisco.com

General comments should be sent to mpls@uu.net
       "
   DESCRIPTION
       "This MIB module contains managed object definitions for
        MPLS Label-Controlled Frame-Relay interfaces as defined
        in (RFC3034).

Copyright (C) The Internet Society (2006).  This
        version of this MIB module is part of RFC 4368; see
        the RFC itself for full legal notices."

-- Revision history.
   REVISION
        "200601120000Z"  -- 12 January 2006
   DESCRIPTION
       "Initial revision, published as part of RFC 4368."
   ::= { mplsStdMIB 10 }

-- Top level components of this MIB module.
-- Tables, Scalars, Notifications, Conformance

mplsLcFrStdNotifications OBJECT IDENTIFIER ::= { mplsLcFrStdMIB 0 }
mplsLcFrStdObjects       OBJECT IDENTIFIER ::= { mplsLcFrStdMIB 1 }
mplsLcFrStdConformance   OBJECT IDENTIFIER ::= { mplsLcFrStdMIB 2 }

-- MPLS LC-FR Interface Configuration Table.
mplsLcFrStdInterfaceConfTable  OBJECT-TYPE
   SYNTAX        SEQUENCE OF MplsLcFrStdInterfaceConfEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "This table specifies per-interface MPLS LC-FR
        capability and associated information.  In particular,
        this table sparsely extends the MPLS-LSR-STD-MIB's
        mplsInterfaceConfTable."
   ::= { mplsLcFrStdObjects 1 }

mplsLcFrStdInterfaceConfEntry OBJECT-TYPE
   SYNTAX        MplsLcFrStdInterfaceConfEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "An entry in this table is created by an LSR for
        every interface capable of supporting MPLS LC-FR.
        Each entry in this table will exist only if a
        corresponding entry in ifTable and mplsInterfaceConfTable
        exists.  If the associated entries in ifTable and
        mplsInterfaceConfTable are deleted, the corresponding
        entry in this table must also be deleted shortly
        thereafter."
   INDEX       { mplsInterfaceIndex }
      ::= { mplsLcFrStdInterfaceConfTable 1 }

MplsLcFrStdInterfaceConfEntry ::= SEQUENCE {
   mplsLcFrStdTrafficMinDlci           DLCI,
   mplsLcFrStdTrafficMaxDlci           DLCI,
   mplsLcFrStdCtrlMinDlci              DLCI,
   mplsLcFrStdCtrlMaxDlci              DLCI,
   mplsLcFrStdInterfaceConfRowStatus   RowStatus,
   mplsLcFrStdInterfaceConfStorageType StorageType
}

mplsLcFrStdTrafficMinDlci OBJECT-TYPE
   SYNTAX        DLCI
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This is the minimum DLCI value over which this
        LSR is willing to accept traffic on this
        interface."
   ::= { mplsLcFrStdInterfaceConfEntry 1 }

mplsLcFrStdTrafficMaxDlci OBJECT-TYPE
   SYNTAX        DLCI
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This is the max DLCI value over which this
        LSR is willing to accept traffic on this
        interface."
   ::= { mplsLcFrStdInterfaceConfEntry 2 }

mplsLcFrStdCtrlMinDlci OBJECT-TYPE
   SYNTAX        DLCI
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This is the min DLCI value over which this
        LSR is willing to accept control traffic
        on this interface."
   ::= { mplsLcFrStdInterfaceConfEntry 3 }

mplsLcFrStdCtrlMaxDlci OBJECT-TYPE
   SYNTAX        DLCI
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This is the max DLCI value over which this
        LSR is willing to accept control traffic
        on this interface."
   ::= { mplsLcFrStdInterfaceConfEntry 4 }

mplsLcFrStdInterfaceConfRowStatus OBJECT-TYPE
   SYNTAX        RowStatus
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This object is used to create and
        delete entries in this table.  When configuring
        entries in this table, the corresponding ifEntry and
        mplsInterfaceConfEntry MUST exist beforehand.  If a manager
        attempts to create an entry for a corresponding
        mplsInterfaceConfEntry that does not support LC-FR,
        the agent MUST return an inconsistentValue error.
        If this table is implemented read-only, then the
        agent must set this object to active(1) when this
        row is made active.  If this table is implemented
        writable, then an agent MUST not allow modification
        to its objects once this value is set to active(1),
        except to mplsLcFrStdInterfaceConfRowStatus and
        mplsLcFrStdInterfaceConfStorageType."
   ::= { mplsLcFrStdInterfaceConfEntry 5 }

mplsLcFrStdInterfaceConfStorageType OBJECT-TYPE
   SYNTAX        StorageType
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "The storage type for this conceptual row.
        Conceptual rows having the value 'permanent(4)'
        need not allow write-access to any columnar
        objects in the row."
   DEFVAL { nonVolatile }
   ::= { mplsLcFrStdInterfaceConfEntry 6 }

-- End of mplsLcFrStdInterfaceConfTable

-- Module compliance.

mplsLcFrStdCompliances
   OBJECT IDENTIFIER ::= { mplsLcFrStdConformance 1 }

mplsLcFrStdGroups
   OBJECT IDENTIFIER ::= { mplsLcFrStdConformance 2 }

-- Compliance requirement for full compliance

mplsLcFrStdModuleFullCompliance MODULE-COMPLIANCE
   STATUS current
   DESCRIPTION
       "Compliance statement for agents that provide
        full support for MPLS-LC-FR-STD-MIB.  Such
        devices can be monitored and also be configured
        using this MIB module."

MODULE -- this module
      MANDATORY-GROUPS {
         mplsLcFrStdIfGroup
      }

OBJECT       mplsLcFrStdInterfaceConfRowStatus
      SYNTAX       RowStatus { active(1), notInService(2) }
      WRITE-SYNTAX RowStatus { active(1), notInService(2),
                               createAndGo(4), destroy(6)
                             }
      DESCRIPTION "Support for createAndWait and notReady is
                   not required."
   ::= { mplsLcFrStdCompliances 1 }

-- Compliance requirement for read-only implementations.

mplsLcFrStdModuleReadOnlyCompliance MODULE-COMPLIANCE
   STATUS current
   DESCRIPTION
       "Compliance requirement for implementations that only
        provide read-only support for MPLS-LC-FR-STD-MIB.
        Such devices can be monitored but cannot be configured
        using this MIB module.
       "

MODULE -- this module
      MANDATORY-GROUPS {
         mplsLcFrStdIfGroup
      }

-- mplsLcFrStdInterfaceConfTable

OBJECT     mplsLcFrStdTrafficMinDlci
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

OBJECT     mplsLcFrStdTrafficMaxDlci
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

OBJECT      mplsLcFrStdCtrlMinDlci
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

OBJECT      mplsLcFrStdCtrlMaxDlci
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

OBJECT       mplsLcFrStdInterfaceConfRowStatus
      SYNTAX       RowStatus { active(1) }
      MIN-ACCESS   read-only
      DESCRIPTION "Write access is not required."

OBJECT      mplsLcFrStdInterfaceConfStorageType
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."
   ::= { mplsLcFrStdCompliances 2 }

-- Units of conformance.

mplsLcFrStdIfGroup OBJECT-GROUP
   OBJECTS {
        mplsLcFrStdTrafficMinDlci,
        mplsLcFrStdTrafficMaxDlci,
        mplsLcFrStdCtrlMinDlci,
        mplsLcFrStdCtrlMaxDlci,
        mplsLcFrStdInterfaceConfRowStatus,
        mplsLcFrStdInterfaceConfStorageType
    }
   STATUS  current
   DESCRIPTION
          "Collection of objects needed for MPLS LC-FR
           interface configuration."
   ::= { mplsLcFrStdGroups 1 }

END