⚝
One Hat Cyber Team
⚝
Your IP:
216.73.216.79
Server IP:
41.128.143.86
Server:
Linux host.raqmix.cloud 6.8.0-1025-azure #30~22.04.1-Ubuntu SMP Wed Mar 12 15:28:20 UTC 2025 x86_64
Server Software:
Apache
PHP Version:
8.3.23
Buat File
|
Buat Folder
Eksekusi
Dir :
~
/
usr
/
share
/
psa-horde
/
imp
/
config
/
Edit File: backends.php
<?php /** * This file specifies which mail servers IMP can login to. * * IMPORTANT: DO NOT EDIT THIS FILE! * Local overrides MUST be placed in backends.local.php or backends.d/. * If the 'vhosts' setting has been enabled in Horde's configuration, you can * use backends-servername.php. * * Example configuration file that sets a different server name than localhost * for the IMAP server: * * <?php * $servers['imap']['hostspec'] = 'imap.example.com'; * * Example configuration file that enables the advanced IMAP server in favor of * the simple server and enables 'hordeauth': * * <?php * $servers['imap']['disabled'] = true; * $servers['advanced']['disabled'] = false; * $servers['advanced']['hordeauth'] = true; * * * Properties that can be set for each server: * =========================================== * * disabled: (boolean) If true, the config entry is disabled. * * name: (string) This is the name displayed in the server list on the login * screen. * * hostspec: (string) The hostname/IP address of the mail server to connect to. * * hordeauth: (mixed) Use Horde authentication? One of: * - true: [DEFAULT] IMP will attempt to use the user's existing * credentials (the username/password they used to log in to * Horde with) to login to this server. * Everything after and including the first @ in the username * will be stripped off before attempting authentication. * - 'full': The username will be used unmodified. * - false: Don't use Horde authentication; always require separate login. * * protocol: (string) The server protocol. One of: * - imap: [DEFAULT] IMAP. Requires a IMAP4rev1 (RFC 3501) compliant * server. * - pop: POP3. Requires a POP3 (RFC 1939) compliant server. All * mailbox options will be disabled (POP3 does not support * mailboxes). Other advanced functions will also be disabled * (e.g. caching, searching, sorting). * * secure: (mixed) Security method used to connect to the server. One of: * - 'ssl': [DEPRECATED; see below] Use SSL to connect to the server. * - 'tls': [DEFAULT on IMAP; RECOMMENDED] Use TLS to connect to the * server. * - false: [DEFAULT on POP3; NOT RECOMMENED] Do not use any encryption. * * The 'ssl' and 'tls' options will only work if you've compiled PHP * with SSL support and the mail server supports secure connections. * * The use of 'ssl' is STRONGLY DISCOURAGED. If a secure connection * is needed, 'tls' should be used and the connection should be made * to the base protocol port (110 for POP3, 143 for IMAP). * See: http://wiki2.dovecot.org/SSL * * port: (integer) The port that the mail service/protocol you selected runs * on. Default values: * - imap (unsecure or w/TLS): 143 * - imap (w/SSL): 993 (DEPRECATED - use TLS on port 143) * - pop (unsecure or w/TLS): 110 * - pop (w/SSL): 995 (DEPRECATED - use TLS on port 110) * * maildomain: (string) What to put after the @ when sending mail. This * setting is generally useful when the sending host is different from the * mail receiving host. This setting will also be used to complete * unqualified addresses when composing mail. E.g. If you want all sent * messages to look like: * * From: user@example.com * * set 'maildomain' to 'example.com'. * * cache: (mixed) Enables IMAP caching for the server. * * Caching is HIGHLY RECOMMENDED. (Do note that if your IMAP server does not * support the CONDSTORE and/or QRESYNC IMAP extensions, flags changed by * another mail agent while the IMP session is active will not be updated.) * * The following values are recognized: * - false: [DEFAULT] Caching is disabled * - true: Caching is enabled using the Horde cache (configured in * horde/config/conf.php). (This option is DEPRECATED; use one of * the below options instead.) * - 'cache': Caching is enabled using the Horde cache (configured in * horde/config/conf.php). It is recommended to use either * 'hashtable', 'nosql', or 'sql' instead, as these backends * have better performance. * The 'cache_lifetime' parameter (integer) can be specified * to define the lifetime of the cached message data. * - 'hashtable': Caching is enabled using the Horde HashTable driver * (configured in horde/config/conf.php). * The 'cache_lifetime' parameter (integer) can be * specified to define the lifetime of the cached message * data. * - 'nosql': Caching is enabled using the Horde NoSQL database * (configured in horde/config/conf.php). * - 'sql': Caching is enabled using the Horde SQL database (configured in * horde/config/conf.php). * - A Horde_Imap_Client_Cache_Backend object: Directly configure the * caching backend to use. For * advanced users only. * * quota: (array) Use this if you want to display a user's quota status. Set * to an empty value to disable quota status (DEFAULT). * * To enable, set the 'driver' key to the name of the driver. The 'params' * key can contain optional configuration parameters. * * These 'params' keys are available for ALL drivers: * - hide_when_unlimited: (boolean) True if you want to hide quota * output when the server reports an unlimited * quota. * - interval: (integer) Update quota information in the UI at this * interval (in seconds). Defaults to 15 minutes. * - unit: (string) What storage unit the quota messages should be * displayed in. One of: * - GB * - MB [DEFAULT] * - KB * * These are the available drivers, along with their optional parameters: * - hook: Use the quota hook to handle quotas (see imp/config/hooks.php). * All parameters defined for this driver will be passed to the * quota hook function. * - imap: Use the IMAP QUOTA extension to handle quotas. The IMAP server * server must support the QUOTAROOT command to use this driver. * This is the RECOMMENDED way of handling quotas. * * smtp: (array) SMTP configuration parameters. * * For configuration parameters marked with a [*] below, the Horde-wide SMTP * configuration is used by default. * * If allowing access to external mail servers (e.g. Gmail), you almost * certainly will want to override the defaults to specify the foreign SMTP * server used to send messages from that given mail domain. * * NOTE: By default, IMP will use the authentication credentials used to * login to the current backend. To use the credentials specified by the * Horde-wide SMTP configuration, 'horde_auth' must be true (see below). * * These configuration parameters are available: * - debug: (string) If set, enables SMTP debugging. See the 'debug' * parameter below (under the 'Debugging Properties' header) * for acceptable values. * - horde_auth: (boolean) If true, populates the 'password' and * 'username' parameters with the authentication credentials * used by the Horde-wide SMTP configuration (only if those * fields are not defined for this backend in IMP). * - host: [*] (string) SMTP server host. * - lmtp: [*] (boolean) If true, the server uses the LMTP protocol. * - localhost: [*] (string) The local hostname. * - password: (string) Password to use for SMTP server authentication. * - port: [*] (integer) SMTP server port. * - secure: [*] (string) Use SSL or TLS to connect. * Possible options: * - false (No encryption) * - 'ssl' (Auto-detect SSL version) * - 'sslv2' (Force SSL version 2) * - 'sslv3' (Force SSL version 3) * - 'tls' (TLS) [DEFAULT] * - 'tlsv1' (TLS direct version 1.x connection to server) * [@since Horde_Smtp 1.3.0] * - true (Use TLS, if available) [@since Horde_Smtp 1.2.0] * - timeout: (integer) Connection timeout, in seconds. Defaults to 30 * seconds * - username: (string) Username to use for SMTP server authentication. * * spam: (array) Spam reporting configuration. This array can contain two * keys - 'innocent' and 'spam' - that defines the behavior when a user * flags a message with one of these actions. * * The 'display' option (boolean) behaves as follows: * - innocent: If true, the innocent action only appears in the user's * spam mailbox (default). If false, the action appears in * all mailboxes. * - spam: If false, the spam action appears in all mailboxes other than * the user's spam mailbox (default). If true, the action appears * in all mailboxes. * * These placeholders are available in the options marked *EXPANDABLE* below * and will be expanded at run-time: * - %u: The Horde username. * - %l: The short username (no domain information). * - %d: The domain name. * * The following drivers are available (at least one driver must be * configured for the spam options to appear in the UI): * * + Email reporting * - email: (string) The e-mail address to use for reporting. * - email_format: (string) Either 'digest' or 'redirect'. * - digest: [DEFAULT; RECOMMENDED] Packages the raw data of all * messages reported by the user in their marking action and * sends to the reporting e-mail address in a single * multipart/digest message. * - redirect: Redirects the message to the reporting e-mail address * Note that this alters the original message's headers * and may break embedded spam reporting signature * information contained in the original message. * * + Null reporting * - null: (boolean) Whether the action should be considered to be * successful or not. This driver can be used to trigger * post-reporting spam actions (i.e. deleting/moving messages) * if this value is true and no other drivers are configured. * * + Program reporting * - program: (string) An external program to report the spam message * to. Messages will be reported to the program via standard * input. * * * Properties that only apply to IMAP servers: * =========================================== * * acl: (boolean) Access Control Lists (ACLs). One of: * - true: Enable ACLs. (Not all IMAP servers support this feature). * - false: [DEFAULT] Disable ACLs. * * admin: (array) Use this if you want to enable mailbox management for * administrators via Horde's user administration interface. The mailbox * management gets enabled if you let IMP handle the Horde authentication * the 'application' authentication driver. Your IMAP server needs to * support mailbox management via IMAP commands. * * Do not define this value if you do not want mailbox management [DEFAULT]. * * The following parameters are available: * - password: (string) The admin user's password. * - user: (string) The admin user. * - userhierarchy: (string) The hierarchy where user mailboxes are * stored. * * autocreate_special: (boolean) If true, automatically create special * mailboxes on login (see 'special_mboxes')? * * special_mboxes: (array) The list of mailbox names to use for special * mailboxes. These values override the default preference values for a * backend. * * The array keys are the special mailbox type, the array values are the * IMAP mailbox name (UTF-8) to use on the server. Available keys: * - IMP_Mailbox::MBOX_DRAFTS * - IMP_Mailbox::MBOX_SENT * - IMP_Mailbox::MBOX_SPAM * - IMP_Mailbox::MBOX_TEMPLATES * - IMP_Mailbox::MBOX_TRASH * * It is also possible to define localized special mailboxes. To do so, use * the array key IMP_Mailbox::MBOX_USERSPECIAL and list the local special * mailboxes in an array, with keys as the IMAP mailbox name (in UTF-8) and * values as the mailbox display label. * * * Debugging properties: * ===================== * * debug: (string) If set, will output debug information about the * client/server communication. The value can be any PHP supported wrapper * that can be opened via PHP's fopen() command. This setting should not be * enabled by default on production servers, since the log file will quickly * grow very large. * * Example: To output to a file, provide the full path to the file (a bare * string is interpreted by PHP to be a filename). This file must be * writable by the PHP process. * * debug_raw: (boolean) By default, debugging will only output a short summary * of message body content sent to and received from the server. If you want * the debug stream to output the full, raw data of the client/server * communication, set this option to true. * * * Advanced properties: * ==================== * * *** The following options should NOT be set unless you REALLY know what *** * *** you are doing! FOR MOST PEOPLE, AUTO-DETECTION OF THESE PARAMETERS *** * *** (the default if the parameters are not set) SHOULD BE USED! *** * * capability_ignore: [IMAP only] (array) A list of IMAP capabilites to * ignore, even if they are supported on the server. The capability names * should be in all capitals. This option may be useful, for example, if it * is known that a certain capability is buggy on the given server. * Otherwise, all available and supported IMAP capabilities will be (and * should be) used. * * comparator: [IMAP only] (string) The search comparator to use instead of * the default IMAP server comparator (e.g. for sorting text fields). See * RFC 4790 [3.1] - "collation-id" - for the format. Your IMAP server must * support the I18NLEVEL extension. By default, the server default * comparator is used. * * id: [IMAP only] (array) Send ID information to the IMAP server. This must * be an array with the keys being the fields to send and the values being * the associated values. Your IMAP server must support the ID extension. * See RFC 2971 [3.3] for a list of defined field values. * * import_limit: [IMAP only] (integer) The maximum number of messages a user * can import. Importing large mailboxes via the IMAP APPEND command is * potentially a resource-intensive operation, and some IMAP servers (e.g. * Dovecot 2.2) can be extremely slow in importing. By default, limit * importing to 2500 messages. Set this to 0 to enforce no message limit. * * lang: [IMAP only] (array) A list of languages (in priority order) to be * used to display human readable messages returned by the IMAP server. Your * IMAP server must support the LANGUAGE extension. By default, IMAP * messages are output in the IMAP server default language. * * namespace: [IMAP only] (array) The list of namespaces that exist on the * server. Example: * * array('#shared/', '#news/', '#public/') * * This parameter should only be used if you want to allow access to names * namespaces that may not be publicly advertised by the IMAP server (see * RFC 2342 [3]). These additional namespaces will be ADDED to the list of * available namespaces returned by the server. * * preferred: (string | array) Useful if you want to use the same backends.php * file for different machines. If the hostname of the IMP machine is * identical to one of those in the preferred list, then that entry will be * selected by default on the login screen. Otherwise the first entry in the * list is selected. * * sort_force: (boolean) By default, IMP only allows sorting by criteria * other than arrival time if using IMAP and the remote IMAP server supports * the SORT extension (RFC 5256). If this setting is true, IMP will * implement sorting on the web server. However, this requires that the * selected sort criteria be downloaded from the remote server for EVERY * message in a mailbox before the mailbox can be displayed. For mailboxes * that contain more than a few hundred messages, this can be a tremendously * expensive operation. Enable sorting on these installations at your peril. * * thread: [IMAP only] (string) Set the preferred thread sort algorithm. This * algorithm must be supported by the remote server. By default, IMP * attempts to use REFERENCES sorting and, if this is not available, will * fallback to ORDEREDSUBJECT sorting performed by Horde on the local server. * * timeout: (integer) Set the server timeout (in seconds). */ /* Example configurations: */ // IMAP server $servers['imap'] = array( // ENABLED by default; will connect to IMAP port on local server 'disabled' => false, 'name' => 'IMAP Server', 'hostspec' => 'localhost', 'hordeauth' => false, 'protocol' => 'imap', 'port' => 143, // Plaintext logins are disabled by default on IMAP servers (see RFC 3501 // [6.2.3]), so TLS is the only guaranteed authentication available by // default. 'secure' => 'tls', ); // POP3 server $servers['pop'] = array( // Disabled by default 'disabled' => true, 'name' => 'POP3 Server', 'hostspec' => 'localhost', 'hordeauth' => false, 'protocol' => 'pop', 'port' => 110, // Default to secure TLS authentication by default (see RFC 2595 [4]). 'secure' => 'tls', ); // Advanced example - mainly here to demonstrate the syntax of all available // options. $servers['advanced'] = array( // Disabled by default 'disabled' => true, 'name' => 'Advanced IMAP Server', 'hostspec' => 'localhost', 'hordeauth' => false, 'protocol' => 'imap', 'port' => 143, 'secure' => 'tls', 'maildomain' => '', 'smtp' => array( // 'auth' => true, // 'debug' => false, // 'horde_auth' => false, // 'host' => 'smtp.example.com', // 'lmtp' => false, // 'localhost' => 'localhost', // 'password' => null, // /* Mail from a MUA SHOULD be sent via the mail submission port (587) // * rather than the MTA port (25). (See RFC 6409/STD 72). // * Note that mail submission REQUIRES some method of authentication // * (whether explicit user/password credentials or configuring the // * mail submission agent to automatically authenticate this host // * based on the network location). */ // 'port' => 587, // 'username' => null ), 'spam' => array( // 'innocent' => array( // 'display' => true, // // // Email reporting driver // 'email' => null, // 'email_format' => 'digest', // // // Null reporting driver // 'null' => true, // // // Program reporting driver // 'program' => null // ), // 'spam' => array( // 'display' => false, // // // Email reporting driver // 'email' => null, // 'email_format' => 'digest', // // // Null reporting driver // 'null' => true, // // // Program reporting driver // 'program' => null // ), // // It is possible to directly define additional spam drivers. // // The 'drivers' array should contain a list of driver objects // // (these classes must implement the IMP_Spam_Base class). // 'drivers' => array( // new IMP_Example_Spam_Driver() // ) ), 'admin' => array( // 'user' => 'cyrus', // 'password' => 'cyrus_pass', // 'userhierarchy' => 'user.' ), 'acl' => true, 'cache' => false, // 'debug' => '/tmp/imp_imap.log', // 'debug_raw' => false, 'quota' => array( 'driver' => 'imap', 'params' => array( 'hide_when_unlimited' => true, 'unit' => 'MB' ) ), 'special_mboxes' => array( // IMP_Mailbox::MBOX_DRAFTS => 'Drafts', // IMP_Mailbox::MBOX_SENT => 'Sent', // IMP_Mailbox::MBOX_SPAM => 'Spam', // IMP_Mailbox::MBOX_TEMPLATES => 'Templates', // IMP_Mailbox::MBOX_TRASH => 'Trash', // IMP_Mailbox::MBOX_USERSPECIAL => array( // 'Example' => _("Example Special Mailbox") // ) ), 'autocreate_special' => false, );
Simpan